Skip to main content

Snyk scanner reference for STO

Harness STO supports the following scan modes for the following Snyk products:

Important notes for running Snyk scans in STO​

Docker-in-Docker requirements​

The following use cases require a Docker-in-Docker background step in your pipeline:

  • Container image scans on Kubernetes and Docker build infrastructures
  • Security steps (not step palettes) on Kubernetes and Docker build infrastructures
    • Required for all target types and Orchestration/DataLoad modes

The following use cases do not require Docker-in-Docker:

Set up a Docker-in-Docker background step

  1. Go to the stage where you want to run the scan.

  2. In Overview, add the shared path /var/run.

  3. In Execution, do the following:

    1. Click Add Step and then choose Background.

    2. Configure the Background step as follows:

      1. Dependency Name = dind

      2. Container Registry = The Docker connector to download the DinD image. If you don't have one defined, go to Docker connector settings reference.

      3. Image = docker:dind

      4. Under Entry Point, add the following: dockerd

        In most cases, using dockerd is a faster and more secure way to set up the background step. For more information, go to the TLS section in the Docker quick reference.

      If the DinD service doesn't start with dockerd, clear the Entry Point field and then run the pipeline again. This starts the service with the default entry point.

      1. Under Optional Configuration, select the Privileged checkbox.
Configure the background step

Root access requirements​

You need to run the scan step with root access if either of the following apply:

note

You can set up your STO scan images and pipelines to run scans as non-root and establish trust for your own proxies using self-signed certificates. For more information, go to Configure STO to Download Images from a Private Registry.

For more information​

The following topics contain useful information for setting up scanner integrations in STO:

Snyk step settings for STO​

The recommended workflow is add a Snyk step to a Security Tests or CI Build stage and then configure it as described below. You can also configure scans programmatically by copying, pasting, and editing the YAML definition.

Scan​

Scan Mode​

  • Orchestration Configure the step to run a scan and then ingest, normalize, and deduplicate the results.

Scan Configuration​

The predefined configuration to use for the scan. All scan steps have at least one configuration.

Target​

Type​

The target type to scan for vulnerabilities.

  • Repository Scan a codebase repo.

    In most cases, you specify the codebase using a code repo connector that connects to the Git account or repository where your code is stored. For information, go to Configure codebase.

  • Container Image Scan the layers, libraries, and packages in a container image.

Name​

The identifier for the target, such as codebaseAlpha or jsmith/myalphaservice. Descriptive target names make it much easier to navigate your scan data in the STO UI.

It is good practice to specify a baseline for every target.

Variant​

The identifier for the specific variant to scan. This is usually the branch name, image tag, or product version. Harness maintains a historical trend for each variant.

Workspace (repository)​

The workspace path on the pod running the scan step. The workspace path is /harness by default.

You can override this if you want to scan only a subset of the workspace. For example, suppose the pipeline publishes artifacts to a subfolder /tmp/artifacts and you want to scan these artifacts only. In this case, you can specify the workspace path as /harness/tmp/artifacts.

Authentication​

Access Token (Orchestration scans)​

The access token to log in to the scanner. In most cases this is a password or an API key.

You should create a Harness text secret with your encrypted token and reference the secret using the format <+secrets.getValue("project.my-access-token")>. For more information, go to Add and Reference Text Secrets.

Ingestion File​

The path to your scan results when running an Ingestion scan, for example /shared/scan_results/myscan.latest.sarif.

  • The data file must be in a supported format for the scanner.

  • The data file must be accessible to the scan step. It's good practice to save your results files to a shared path in your stage. In the visual editor, go to the stage where you're running the scan. Then go to Overview > Shared Paths. You can also add the path to the YAML stage definition like this:

        - stage:
          spec:
            sharedPaths:
              - /shared/scan_results

Additional CLI flags​

You can use this field to run the Snyk scanner with specific command-line arguments.

Log Level​

The minimum severity of the messages you want to include in your scan logs. You can specify one of the following:

  • DEBUG
  • INFO
  • WARNING
  • ERROR

Fail on Severity​

Every Security step has a Fail on Severity setting. If the scan finds any vulnerability with the specified severity level or higher, the pipeline fails automatically. You can specify one of the following:

  • CRITICAL
  • HIGH
  • MEDIUM
  • LOW
  • INFO
  • NONE — Do not fail on severity

The YAML definition looks like this: fail_on_severity : critical # | high | medium | low | info | none

Settings​

You can use this field to run the Snyk scan with additional options.

Show original CVSS scores overridden by Snyk security policies​

You can configure a Snyk step to show the original score when a Snyk Enterprise security policy overrode the severity for an issue coming from the snyk CLI. You can see this information in Issue Details.

Security override in Security Tests

This feature is supported for snyk container and snyk test JSON output that properly reflects an override.

To enable this behavior, add the setting ingest_tool_severity and set it to true in the Snyk ingestion step. With this setting enabled, the Snyk step processes the relevant data for issues with overridden severities.

Add ingest_tool_severity to Snyk step

Additional Configuration​

In the Additional Configuration settings, you can use the following options:

Advanced settings​

In the Advanced settings, you can use the following options:

Security step settings for Snyk scans in STO (legacy)​

note

You can set up Snyk scans using a Security step, but this is a legacy functionality. Harness recommends that you use a Snyk step instead.

Target and variant​

The following settings are required for every Security step:

  • target_name A user-defined label for the code repository, container, application, or configuration to scan.
  • variant A user-defined label for the branch, tag, or other target variant to scan.
note

Make sure that you give unique, descriptive names for the target and variant. This makes navigating your scan results in the STO UI much easier.

You can see the target name, type, and variant in the Test Targets UI:

Target name, type, and branch

For more information, go to Targets, baselines, and variants in STO.

Snyk scan settings​

  • product_name = snyk:
  • scan_type : containerImage or repository
  • policy_type
    • accepted value for containerImage: ingestionOnly
    • accepted values for repository: orchestratedScan, ingestionOnly
  • product_access_token
  • product_config_name : default
  • snyk_api : URL to the Snyk instance, if you're using an on-prem installation.
  • fail_on_severity - See Fail on Severity.

Container scan settings​

The following settings apply to all scanners where the scan_type is containerImage.

  • container_type
    • accepted value(s): local_image, docker_v2, jfrog_artifactory, aws_ecr
      • for container_type set to local
        • None
      • for container_type set to docker_v2
        • container_access_id: Username
        • container_access_token: Password/Token
      • for container_type set to jfrog_artifactory
        • container_access_id: Username
        • container_access_token: Password/Token
      • for container_type set to aws_ecr
        • container_access_id: Username
        • container_access_token: Password/Token
        • container_region: AWS default region
  • container_domain

Ingestion file​

If the policy_type is ingestionOnly:

  • ingestion_file = The path to your scan results when running an Ingestion scan, for example /shared/scan_results/myscan.latest.sarif.

  • The data file must be in a supported format for the scanner.

  • The data file must be accessible to the scan step. It's good practice to save your results files to a shared path in your stage. In the visual editor, go to the stage where you're running the scan. Then go to Overview > Shared Paths. You can also add the path to the YAML stage definition like this:

        - stage:
          spec:
            sharedPaths:
              - /shared/scan_results