Skip to main content

Nikto scanner reference for STO

You can scan your application instances and ingest results from Nikto, an open-source scanner that runs tests against web servers to detect dangerous files/programs, outdated server versions, and problems with specific server releases.

Important notes for running Nikto scans in STO​

Docker-in-Docker requirements​

The following use cases require a Docker-in-Docker background step in your pipeline:

  • Container image scans on Kubernetes and Docker build infrastructures
  • Security steps (not step palettes) on Kubernetes and Docker build infrastructures
    • Required for all target types and Orchestration/DataLoad modes

The following use cases do not require Docker-in-Docker:

Set up a Docker-in-Docker background step

  1. Go to the stage where you want to run the scan.

  2. In Overview, add the shared path /var/run.

  3. In Execution, do the following:

    1. Click Add Step and then choose Background.

    2. Configure the Background step as follows:

      1. Dependency Name = dind

      2. Container Registry = The Docker connector to download the DinD image. If you don't have one defined, go to Docker connector settings reference.

      3. Image = docker:dind

      4. Under Entry Point, add the following: dockerd

        In most cases, using dockerd is a faster and more secure way to set up the background step. For more information, go to the TLS section in the Docker quick reference.

      If the DinD service doesn't start with dockerd, clear the Entry Point field and then run the pipeline again. This starts the service with the default entry point.

      1. Under Optional Configuration, select the Privileged checkbox.
Configure the background step

Root access requirements​

You need to run the scan step with root access if either of the following apply:

note

You can set up your STO scan images and pipelines to run scans as non-root and establish trust for your own proxies using self-signed certificates. For more information, go to Configure STO to Download Images from a Private Registry.

For more information​

The following topics contain useful information for setting up scanner integrations in STO:

Nikto step settings for STO scans​

The recommended workflow is add a Nikto step to a Security Tests or CI Build stage and then configure it as described below. You can also configure scans programmatically by copying, pasting, and editing the YAML definition.

Scan​

Scan Mode​

  • Orchestration Configure the step to run a scan and then ingest, normalize, and deduplicate the results.

Scan Configuration​

The predefined configuration to use for the scan. All scan steps have at least one configuration.

Target​

Type​

  • Instance Scan a running application.

Name​

The identifier for the target, such as codebaseAlpha or jsmith/myalphaservice. Descriptive target names make it much easier to navigate your scan data in the STO UI.

It is good practice to specify a baseline for every target.

Variant​

The identifier for the specific variant to scan. This is usually the branch name, image tag, or product version. Harness maintains a historical trend for each variant.

Instance​

Domain​

Domain of the application instance to scan. You can include the full path to the app in this field, or split the full path between the Domain and the Path fields. Example: https://myapp.io/portal/us

Protocol​

HTTPS (default) or HTTP.

Port​

The TCP port used by the scanned app instance.

Path​

Path to append to the application instance domain, if you're splitting the full path between the Domain and Path settings. For example, you might specify the domain as https://myapp.io and the path as /portal/us.

Ingestion​

Ingestion File​

The path to your scan results when running an Ingestion scan, for example /shared/scan_results/myscan.latest.sarif.

  • The data file must be in a supported format for the scanner.

  • The data file must be accessible to the scan step. It's good practice to save your results files to a shared path in your stage. In the visual editor, go to the stage where you're running the scan. Then go to Overview > Shared Paths. You can also add the path to the YAML stage definition like this:

        - stage:
          spec:
            sharedPaths:
              - /shared/scan_results

Log Level, CLI flags, and Fail on Severity​

Log Level​

The minimum severity of the messages you want to include in your scan logs. You can specify one of the following:

  • DEBUG
  • INFO
  • WARNING
  • ERROR

Additional CLI Flags​

You can use this field to run the nikto scanner with specific command-line arguments. For example, you might want to customize the tests that the scanner runs with the -Tuning argument. The following example excludes a test from the scan: -Tuning x01

Fail on Severity​

Every Security step has a Fail on Severity setting. If the scan finds any vulnerability with the specified severity level or higher, the pipeline fails automatically. You can specify one of the following:

  • CRITICAL
  • HIGH
  • MEDIUM
  • LOW
  • INFO
  • NONE — Do not fail on severity

The YAML definition looks like this: fail_on_severity : critical # | high | medium | low | info | none

Additional Configuration​

In the Additional Configuration settings, you can use the following options:

Advanced settings​

In the Advanced settings, you can use the following options:

Security step settings for Nikto scans in STO (legacy)​

note

You can set up Nikto scans using a Security step, but this is a legacy functionality. Harness recommends that you use an Nikto step instead.

Target and variant​

The following settings are required for every Security step:

  • target_name A user-defined label for the code repository, container, application, or configuration to scan.
  • variant A user-defined label for the branch, tag, or other target variant to scan.
note

Make sure that you give unique, descriptive names for the target and variant. This makes navigating your scan results in the STO UI much easier.

You can see the target name, type, and variant in the Test Targets UI:

Target name, type, and branch

For more information, go to Targets, baselines, and variants in STO.

Nikto scan settings​

  • product_name = nikto
  • scan_type = instance
  • policy_type = orchestratedScan or ingestionOnly
  • product_config_name
    • Accepted values(s):
      • default(Scan the host on port 80)
      • nikto-full (Scan the host on ports 80 and 443 with -Tuning 9)
      • nikto-full-web (Scan the host on ports 80 and 443)
  • fail_on_severity - See Fail on Severity.
  • tool_args — You can use this field to run the nikto scanner with specific command-line arguments. For example, you can customize the tests that the scanner runs with the -Tuning argument. The following example excludes a test from the scan: tool_args = -Tuning x01

Instance scan settings​

The following settings apply to Security steps where the scan_type is instance.

  • instance_domain
  • instance_path
  • instance_protocol
  • instance_port
  • instance_username The username for authenticating with the external scanner.
  • instance_password You should create a Harness text secret with your encrypted password and reference the secret using the format <+secrets.getValue("project.container-access-id")>. For more information, go to Add and reference text secrets.

Ingestion file​

If the policy_type is ingestionOnly:

  • ingestion_file = The path to your scan results when running an Ingestion scan, for example /shared/scan_results/myscan.latest.sarif.

  • The data file must be in a supported format for the scanner.

  • The data file must be accessible to the scan step. It's good practice to save your results files to a shared path in your stage. In the visual editor, go to the stage where you're running the scan. Then go to Overview > Shared Paths. You can also add the path to the YAML stage definition like this:

        - stage:
          spec:
            sharedPaths:
              - /shared/scan_results